Mashiinka Lathe-ka ee Sariirta Fidsan ee CNC CK6125
Qalabka CNCASTAAMAHA:
Mashiinkan waxaa si weyn loogu isticmaalaa farsamaynta qalabka korontada, qalabka, baabuurta, mootooyinka,
qalabka lagu xidho, qalabka lagu qaado, mashiinnada sawir qaadista iyo filimada, qalabka qalabka, saacadaha, muraayadaha, matoorrada qalabka xafiisyada,
Waa qalab ku habboon oo hufan, waalka, tuubooyinka gaaska iyo qaybo kale oo sax ah oo adag.
warshadaha mashiinnada qalabka.
Heerka Caadiga ahAAgabka:
1. Xawaaraha aan lahayn tallaabo
2. Iyada oo leh nidaamka servo
3.4 station station torrent
QEEXIDDA:
| QEEXIDDA | CK6125 | CK6130 |
| Ugu badnaan sariirta korkeeda | 250 mm | 300 mm |
| Ugu badnaan. Ku dul wareeg isgoyska isgoyska | 100 mm | 90 mm |
| Dhererka ugu badan ee habaynta | Chuck 260/collet320 mm | Chuck 290/collet400 mm |
| daloolka dunmiiqa | 48 mm | 48 mm |
| Dhexroorka ugu badan ee usha | 41 mm | 41 mm |
| Sanka isbuunyada | A2-5 | A2-5 |
| Xawaaraha dunmiiqa | 150-2500 rpm | 150-2500 rpm |
| Awoodda matoorka dunmiiqa | 4 kw | 4 kw |
| Safarka dhidibka X/Z | 300/350 mm | 300/380 mm |
| Xuddunta dhidibka X/Z | Adeeg 4/4 kw | 4/4 kw |
| Xawaaraha quudinta degdegga ah ee dhidibka X/Z | 8/10 m/daqiiqo | 8/10 m/daqiiqo |
| Saxnaanta booska dhidibka X/Z | 0.01/0.015 mm | 0.01/0.015 mm |
| Ku celcelinta dhidibka X/Z | 0.012/0.013 mm | 0.012/0.013 mm |
| Qaybta qalabka | 16*16mm | 16*16mm |
| Gacmaha tailstock dia. | 52 mm | 52 mm |
| safar gacmo-gashi oo tailstock ah | 90 mm | 100 mm |
| Dabayl yar | MT4# | MT4# |
| Waqooyi Galbeed | 950 kg | 1200 kg |
| Cabbirka mashiinka (L*W*H) | 1780*800*1600 mm | 1750*1200*1570 mm |
Noo soo dir fariintaada:
Qaybaha alaabta
-
Mashiinka Lathe-ka ee CNC ee Fidsan CLK6150P
-
Mashiinka Lathe-ka ee CNC ee Fidsan CAK6150
-
Mashiinka Mashiinka Lathe-ka ee CNC ee Fidsan J35
-
Mashiinka Lathe-ka ee Sariirta Fidsan ee CNC CK6146ZX
-
Sariir Fidsan oo CNC ah oo lathe ah oo mathiin ah CAK6166
-
Mashiinka Lathe-ka ee Sariirta Fidsan ee CNC CK6140